The conveyors transport the products from the depalletiser to the filler.
The depalitiser outfeed table has a very small pitch modular belt (8mm) eliminating the need for a dead plate between the two belts. This makes it possible to set up a new pallet layer during the removal of the bottles.
The discharge conveyor transports the products to the buffer. To discharge the various products in patent, the guide is adjustable from a single point.
The buffer has sufficient capacity to accommodate a pallet change (cycle time 35s).
The adjustable guide of the buffer is divided in the middle of the bend. The first part is adjusted from the adjustment point in the discharge belt, the other from the adjustment point on the inliner.
The Inliner ensures a progression from bulk transport to transport on a single track by means of a step by step increase in speed between successive chains.
With the help of the single point adjustment, the width of the guides can be easily adjusted for a section of the track.
The single track towards the filler has a section with a clear passage height of 900mm. This makes it possible to slide containers under the track on site.